User Tools

Site Tools




This tutorial describes the configuration process of an iOS device, to allow Internet access, using Eduroam's wireless network, provided by Polytechnic Institute of Viana do Castelo.

This is a step by step tutorial providing the necessary stages to configure the client. You must possess your institutional access credentials provided by IPVC.

This tutorial was based on an official iOS version, however the configurations can be replicated to other systems.

If you find any anomaly, please contact the Informatic Services.


This tutorial was based on the following OS requirements and software versions:

 Authentication Client Application: Cyberoam iAccess(Cyberoam Technologies Pvt. Ltd.)
 OS: iOS
 Version: 7.1.1

Step by Step Configuration

Installation Process: Download Client (Cyberoam iAccess) and install it in your mobile device. You can download the Client from:

Configuration Process:

Step 1: Access the application menu and run Cyberoam iAccess application.

Step 2: Configure Client

  • Start Client application. You will be briefed about the app, as shown below.

  • The login screen appears. Before logging in, you need to define settings for the Client. Click Settings to configure the client, as shown below.

  • Click Gateway IP to set the Cyberoam IP Address as your authentication gateway. Specify IP Address of the authentication gateway as shown in the screen.
    • Gateway IP:

  • You can also set the following parameters.
Parameter Value Description
Auto Login Disabled(Default) When enables, user automatically logs in on application restart. Disable if you do not want to login automatically.
Save password Enabled (Default) When enable client saves your password. This option is automatically enabled if Auto Login is enabled. Disable if you do not want client to save your password.
Show Notification Enabled (Default) When enabled, user receives notifications on the Notification Bar on events like login, logout or errors. Disable if you do not want to receive notifications.
  • Tap “Done” to save settings and return to Login Screen. You will get a message with successfull connection to the sever: “Gateway found”.

Step 3: Login into Client

  • In the Login Screen, specify your credentials and tap Login to log into the client.

  • After successful login, minimize client and start using the Internet.

Step 4: Logout

After using the Internet, you can logout of Client by clicking “Logout” on the upper right corner of each screen to logout from the client.

cyberoam_ios_en.txt · Last modified: 2017/11/24 14:44 (external edit)